Computer Engineering

Study of assembling and designing methods of 3D model in MBD products

Expand
  • 1.China Airborne missile Academy, Henan Luoyang 471009;
    2.a.School of Computer Science;b.College of Electromecharical Engineering, Shenyang Aerospace University, Shenyang 110136

Received date: 2013-03-25

Abstract

According to the current research on 3D model, the paper analyzes the modeling approach, and proposes an electronic component modeling method based on UG, Mentor, Teamcenter8 Parameter modeling approach is selected in this design.The development of interface technology can facilitate the parameter transfer and realize the whole fast driving.3D model assembly design methods based on middleware interface are selected.Associations between parts can be quickly established in this way and requirements of the overall coordination can be taken into account.At last, the versatility and design efficiency of the electronic component 3D model assembly design can be improved to a certain extent.Instances show that this design method can take full advantage of the resources of the existing products, having good versatility and flexibility.

Key words: 3D model; MBD; assembly design

Cite this article

ZHANG Yu, ZHOU Da-hai, LIU Hong-jun . Study of assembling and designing methods of 3D model in MBD products[J]. Journal of Shenyang Aerospace University, 2013 , 30(4) : 64 -68 . DOI: 10.3969/j.issn.2095-1248.2013.04.013

References

[1]董正卫, 田立中.UG/OPEN API编程基础 [M].北京:清华大学出版社, 2005.
[2]苟凌怡, 魏生民.扩展和定制基本产品数据对象方法研究[J].机械科学与技术, 2000, 19(4)668-670+673.
[3]安玉新.PDM在航空工业企业中的实施研究[J].物流技术, 2005(3):67-69.
[4]孙家坤, 李兆前, 高琦, 等.基于iMAN的报表系统的开发[J].计算机工程与应用, 2003(18):145-146.
[5]赖朝安, 孙延明, 郑时雄.IMAN的二次开发关键技术[J].计算机工程与应用, 2001(24):25-26+166.
[6]明亮.基于iMAN的产品数据管理研究及其实施与应用[D].长沙:湖南大学, 2006.
[7]杨滨.PDM系统的功能及实施应用技术[J].电子机械工程, 2001(6):6-9.
[8]周秋忠, 范玉青.MBD技术在飞机制造中的应用[J].航空维修与工程, 2008(3):55-57.
Outlines

/