Considering some deficiencies of theoretical and experimental research in the mechanical design, the application of virtual prototype is of great significance to the design and research of the angle fatigue tester.With the help of virtual prototype software ADAMS, the 3D prototype model of angle fatigue tester is derived, and kinematic pairs, constraint and load are added to the simulation model, and kinematics simulation of load part and a swing part is carried out.The angle-time curve, angular velocity-time curve and angular acceleration- time curve of angle fatigue tester are obtained, and the simulation results are analyzed.
HOU Zhan-feng, QU Li-gang
. Kinematics simulation of angle fatigue tester based on ADAMS[J]. Journal of Shenyang Aerospace University, 2013
, 30(2)
: 41
-45
.
DOI: 10.3969/j.issn.2095-1248.2013.02.010
[1]陈龙, 颉潭成, 夏新涛.滚动轴承应用技术[M].北京:机械工业出版社, 2010.
[2]马亚良, 陈仁竹.轴承制造技术[M].北京:清华大学出版社, 2008.
[3]濮良贵, 纪名刚.机械设计[M].北京.高等教育出版社, 2003.
[4]郑建荣.ADAMS虚拟样机技术入门与提高[M].北京:机械工业出版社, 2002.
[5]郑建荣.ADAMS一虚拟样机技术入门与提高[M].北京:机械工业出版社, 2001.
[6]葛正浩等编著.ADAMS2007虚拟样机技术[M].北京:化学工业出版社, 2010.
[7]陈立平.机械系统动力学分析及ADAMS应用教程[M].北京:清华大学出版社, 2005:1-70.
[8]余国权.基于CATIA和ADAMS的减速器参数化设计及仿真[M].大连:大连理工大学, 2006.
