The research of vibro-acoustic coupling characteristics of thin-walled structure of engine combustion chamber is directly related to its thermal vibro-acoustic coupling fatigue failure. In this paper, the vibro-acoustic coupling numerical model of combustion chamber with the cooling channel was established with the finite element software ANSYS. The vibration characteristics of the thin-walled structure of combustion chamber were calculated in the case of considering and not considering the coupling element. Results show that, the modal frequencies of the thin-walled structure of combustion chamber decrease slightly considering the coupling. But the modal shapes corresponding to the frequencies remain the same, and produce strong coupling only in the frequency 389.6Hz. The influence of cooling channel on structural vibration is larger than the combustion chamber cavity, which, therefore, should be considered in the future study.
GUO Xiao-ling, AI Yan-ting, ZHANG Ting-ting
. Finite element analysis of the vibro-acoustic coupling of thin-walled structure of combustion chamber[J]. Journal of Shenyang Aerospace University, 2013
, 30(1)
: 20
-25
.
DOI: 10.3969/j.issn.2095-1248.2013.01.005
[1]Rob.Huls.Acousto-elastic interaction in combustion chambers[D].University of Twente, 2006.
[2]R.A.Huls.Vibration prediction in combustion chambers by coupling finite elements and large eddy simulations[J].Journal of Sound and Vibration, 2007, 304(1-2):224-229.
[3]Artur K, Pozarlik.Numerical study of structure vibration induced by combustion noise-one way interaction[J].In Proceeding of the International Congress On Sound and Vibration, 2007, 7(14):9-12.
[4]陈钢, 赵国忠, 顾元宪.声场-结构耦合系统灵敏度分析及优化设计研究[J].振动与冲击, 2007, 26(4):86-89.
[5]田红莉, 刘志峰.箱体结构的声固耦合有限元分析[J].机械设计与制造, 2007(7):24-26.
[6]李丽君, 刚宪约.开口薄壁结构声固耦合问题的计算方法[J].机械设计, 2011, 2(28):12-15.
[7]刘鹏, 刘更.驾驶室结构振动及其声固耦合噪声响应分析[J].机械科学与技术, 2006, 7(25):856-859.
[8]王岩松, 李燕, 汤晓林, 等.大客车车内噪声有限元声固耦合建模与仿真[J].机械设计与制造, 2008(11):74-76.
[9]Dhandole S, Modak S V.On improving weakly coupled cavity models for vibro-acoustic predictions and design[J].Applied Acoustics, 2010(71):876-878.
