The study of the business interruption risk is carried out in this paper from risk angle with manufacturers as the object.It emphasizes the analysis of the equipment failure mode.The method of topology diagram is used to establish topology diagram of production line, the subsystem of production line and device feature diagram of each subsystems in order to do a quantitative study of manufacturers′ business interruption risk.Some factors about the mode have been considered to make a further study at the end of this paper.
REN Yu-yan WU Qiong
. Study on assessment model about manufacturers′ business interruption risk in China[J]. Journal of Shenyang Aerospace University, 2013
, 30(6)
: 82
-87
.
DOI: 10.3969/j.issn.2095-1248.2013.06.018
[1]吴穹, 许开立.安全管理学[M].北京:煤炭工业出版社, 2002.
[2]王隆太, 吉卫喜.制造系统工程[M].北京:机械工业出版社, 2008.
[3]杨召凯.生产加工车间的布局及生产线平衡研究[D].北京:北京工业大学, 2007.
[4]孙永国, 孙永全, 郭建英.串并联系统可用性优化方法[J].电机与控制学报, 2007, 11(3):315-317+320.
[5]刘婷婷.制造业企业营业中断风险研究[D].沈阳:沈阳航空航天大学, 2010.
[6]SUN Yong-guo, SUN Yong quan, GUO Jian-ying.Availability optimization design of series parallel system[J].ELECTRIC MACHINES AND CONTROL, 2007, 11(3):2.
[7]孙卫佳.加工制造业生产线资源优化配置研究[D].吉林:吉林大学, 2004.
[8]徐常梅.利润损失保险学[M].上海:复旦大学出版社, 2007.
[9]陶存文, 耿宇亭.国外营业中断保险制度及其启示[J].保险研究, 2008(4):6-10.
