Based on the aero-engine assembly technical process,assembly tooling design process,and the theory of discoid rotors,this paper studies and designs a configuration of flexible assembly tooling for aero-engines of different types and models by the application of the serial-parallel manipulator.The basic principle and key design technology are presented in details.Finally the finite element method is used to prove its feasibility in terms of statics.This study has the outstanding theoretical significance for the aero-engine numeral assembly and the improvement of manufacture efficiency.
LI Wei-nan,ZHU Ning,SHI Hong,DU Le-pu
. Study on the configuration of flexible assembly tooling for aero-engine discoid rotors[J]. Journal of Shenyang Aerospace University, 2013
, 30(3)
: 6
-9
.
DOI: 10.3969/j.issn.2095-1248.2013.03.002
[1]郭恩明.航空先进制造技术发展趋势[J].航空制造技术,2007,z1:1-5.
[2]陈昌伟,胡国清,张冬至.飞机数字化柔性工装技术研究[J].中国制造业信息化,2009(9):21-24+28.
[3]安百玲,王旭辉.板材加工柔性工具技术研究[J].锻压装备与制造技术,2010(5):82-85.
[4]北京航空学院,涡喷七发动机结构[M].北京:北京航空学院,1978:8-9.
[5]Sparacino F,J M Herve.Synthesis of parallel manipulators using Lie-groups Y-STAR and H-ROBOT[C].Proceedings of the 1993 IEEE Tsukuba International Workshop on Advanced Robotics-Can robots contribute to preventing environmental deterioration.Tsukuba,1993.
[6]Félix Majou,Philippe Wenger,Damien Chablat.Design of a 3 axis parallel machine tool for high speed machining:the orthoglide[C].IDMME,2002:1-10.
[7]蔡光起,石宏,李康举.3-TPS混联机床结构分析与运动描述[J].机械制造,2005,43(8):16-19.
[8]Rosidah Sam,Kamarul Arrifin,Norlida Buniyamin.Simulation of pick and place robotics system using Solidworks softmotion[C].ICSET,2012:1-6.
[9]Li Cheng,Hongguang Wang.Finite element modal analysis of the FPD glass substrates handling robot[C].ICMA,2012:1341-1346.
