Telecommunication Engineering

An accurate testing method for vibration mode of printed circuit board

Expand
  • 1.Jiangsu Province Key Laboratory of Aerospace Power Systems;2.College of Energy & Power Engineering, Nanjing University of Aeronautics & Astronautics, Nanjing 210016;3.Center of Electron, AVIC Aviation Motor Control System Institute, Jiangsu Wuxi 214063

Received date: 2013-11-11

Abstract

Dynamic performance of PCB directly affects the reliability of airborne electronic equipment under vibration and shock, so it is necessary to make a dynamic analysis in its design stage.PCB is a thin plate structure with small mass, thus the mass loading qualities will affect modal test results when using accelerometer.This paper compares the test data acquired by accelerometer and LDV, analyzes the mass loading effects of the accelerometer, verifies the effects of the method for eliminating transducer mass loading qualities, and finally draws two conclusions:1)The transducer mass loading effects significantly influence the modal test data and it can not be completely eliminated.2)Accurate and detailed modal parameters can be achieved by using SLDV.

Cite this article

CHEN Hao-ying, ZANG Chao-ping, WANG Xiao-wei, SONG Hua . An accurate testing method for vibration mode of printed circuit board[J]. Journal of Shenyang Aerospace University, 2014 , 31(1) : 60 -66 . DOI: 10.3969/j.issn.2095-1248.2014.01.013

References

[1]Steinberg D S.Vibration analysis for electronic equipment[M].New Jersey:John Wiley & Sons, 2000.
[2]Amy R A, Aglietti G S, Richardson G.Accuracy of simplified printed circuit board finite element models[J].Microelectronics Reliability, 2010, 50(1):86-97.
[3]Gibson R F.Modal vibration response measurements for characterization of composite materials and structures[J].Composites Science and Technology, 2000, 60(15):2769-2780.
[4]Ewins D J.Modal testing:theory, practice and application[M].Baldock:Research studies press, 2000.
[5]Silva J M M, Maia N M M, Ribeiro A M R.Some applications of coupling/uncoupling techniques in structural dynamics[C].15th International Modal Analysis Conference, Orlando:Florida, 1997.
[6]Ashory M R.Correction of mass-loading effects of transducers and suspension effects in modal testing[C].Proceedings-SPIE the international society for optical engineering SPIE internatioal society for optical, 1998(2:)815-828.
[7]Cakar O, Sanliturk K Y.Elimination of transducer mass loading effects from frequency response functions[J].Mechanical Systems and Signal Processing, 2005, 19(1):87-104.
[8]傅志方, 华宏星.模态分析理论与应用[M].上海:上海交通大学出版社, 2000.
[9]张艳艳, 巩轲, 何淑芳, 等.激光多普勒测速技术进展[J].激光与红外, 2010, 40(011):1157-1162.
[10]程诗叙.印制电路板与集成电路组件的模态分析及振动可靠性研究[D].成都:电子科技大学硕士学位论文, 2005.
Outlines

/