航空宇航工程

基于参数化关联技术的冲裁模具设计研究

展开
  • 沈阳航空航天大学 航空制造工艺数字化国防重点学科实验室, 沈阳 110136
韩志仁(1964-), 男, 河北唐山人, 教授, 主要研究方向:钣金成形、CAE和飞机数字化制造技术;E-mail:hanren888@163.com。 航空宇航工程

收稿日期: 2013-11-13

Study of blanking design based on parameterization-associated technology

Expand
  • National Key Discipline Laboratory of Aeronautical Manufacturing Technology Digitization, Shenyang Aerospace University, Shenyang 110136

Received date: 2013-11-13

摘要

对于相似性零件冲压模具重复设计和零件更改造成的模具重新设计的问题, 参数化关联技术是主要的解决途径之一。本文研究了参数关联的理论和方法, 研究了参数的传递的方法, 以冲裁模具的设计为例, 介绍了冲裁模具参数化关联技术的具体实现, 并应用CATIA二次开发方法进行基于参数化关联技术的冲裁模具设计。实现了冲裁模具的快速设计, 在设计依据发生更改时模具设计能够随之进行快速更新, 从而提高了设计效率。

本文引用格式

韩志仁, 薛 航 . 基于参数化关联技术的冲裁模具设计研究[J]. 沈阳航空航天大学学报, 2014 , 31(1) : 1 -5 . DOI: 10.3969/j.issn.2095-1248.2014.01.001

Abstract

Aimed at the problem of the blanking die redesign and similar workpieces repeating design, the parameterization-associated technology is one of the main solutions to reducing redesign The theory and methodology about parameterization-associated technology are researched, and the method delivering parameters is introduced.By illustrating the design of a blanking die, this paper presents the realization of the parameterization-associated technology, carries out a blanking die design based on both parameterization associated technology and the secondary development of CATIA method.Not only will the rapid design system of blanking dies develop, but as the design database changes, accordingly, the blanking die is rapidly updated, which, as a result, will raise the working efficiency.

参考文献

[1]姜辉.数字化工装设计探讨[J].金属加工(冷加工), 2010(7):44-45.
[2]王永军, 王俊彪, 魏生民.并行工程环境下的飞机工装设计数据管理[J].机械科学与技术, 2002, 21(6):1004-1007.
[3]孟祥旭, 徐延宁.参数化设计研究[J].计算机辅助设计与图形学学报, 2002, 14(11):1086-1090.
[4]康文利, 张颖.CATIA二次开发技术在齿轮参数化设计中的应用[J].制造业信息化, 2010(11):81-82.
[5]邝芸.UGNX 中的参数化设计[J].科技经济市场, 2006(9):6-7.
[6]李畅, 李建军, 温建勇, 等.基于UG的关联设计技术及其在级进模CAD系统中的应用[J].中国机械工程, 2002(11):1967-1971.
[7]鲁玉峰, 周华锋.基于UG/CAD工装设计参数化与模块化方法的研究[J].2009, 17(9):17-25.
[8]Papazian J M, Anagostou E L, Christ R J, et al.Tooling for rapid sheet metal parts production[J].CA USA:6th Joint FAA/DoD/NASA Conference on Aging Aircraft.San Francisco, 2002(9):56-58.
[9]李汶龙, 田锡天, 刘书暖.基于三维CAD的智能化工装设计与管理系统研究[J].制造业信息化, 2006, 12(10):74-77.
[10]潘志毅.飞机装配工装智能设计关键技术研究与系统开发[D].南京:南京航空航天大学, 2008.
[11]Pahl G, Beitz W.Engineering design[M].London:The Design Council, 1984.
[12]崔琼瑶, 齐从谦.基于参数化技术的自顶向下设计及其应用[J].同济大学学报, 2002, 30(9):1087-1090.
[13]王孝培.冲压手册[M].北京:机械工业出版社, 2004:53-54.
[14]高军, 李熹平, 修大鹏.冲压模具标准件选用与设计指南[M].北京:化学工业出版社, 2007:65-70.
文章导航

/